Freewire
Freewire’s integrated battery technology ensures full charging uptime even when a local power source is unavailable, making them the perfect choice for industries which cannot afford any power loss, and locations where power is unreliable.
Suitable Freewire charger business applications include construction work, disaster relief, entertainment venues, utility companies, telecom companies, and aviation.
Freewire Charging Solutions
(Brochures)
Freewire Boost Charger
Freewire Mobi EV Charger
Freewire Mobi Gen
Freewire Boost Charger
Freewire Boost Charger™ is the top choice on the market for battery-integrated DC EV charging. These units easily connect to your existing electrical infrastructure, and can be set up with very little installation time or permitting process.
With 160 kWh of battery capacity and 120 kW output, the Boost Charger is future-proofed for the EVs of today and the next generation electric vehicles.
Recharging with up to 27 kW from the grid, the Boost Charger enables ultrafast charging using the same infrastructure as Level 2 chargers, but with up to 40% lower cost of installation versus similarly-powered fast chargers. Deliver high-quality power while significantly reducing costly demand charges utilizing the Boost Charger’s battery-integrated platform.
Key Features:
- Energy-buffing technology takes advantage of off-peak electricity rates, resulting in lower energy costs
- The system can recharge from a single-phase or three-phase connection, allowing for an easier setup
- Can charge EVs at up to 480 miles of range per hour
- Up to six Boost Chargers can operate on the same grid connection
- Dual ports allow for simultaneous charging of two EVs
- CHAdeMO and CCS port-compatible
SPECIFICATIONS:
| Output Power | 120 kW total, two vehicles at 60 kW each, one vehicle at 100 kW max |
| Output Voltage | 200 V – 500 V |
| Output Connectors | Dual-port: CHAdeMO and CCS |
| Energy Chemistry | Lithium nickel manganese cobalt oxide |
| Energy Capacity | 160 kWh |
| Power | Up to 27 kW |
| Voltage (AC) | 3Ø Y 208 V 1Ø 240 V |
| Current | 3Ø: 100 A service, 88 A typical 1Ø: 150 A service, 132 A typical |
| Frequency | 50 / 60 Hz ± 1% |
| Dimensions | 91 cm (36") W x 107 cm (42") L x 236 cm (93") H |
| Weight | 1,588 kg (3,500 lbs) |
| Operating Temperature | -20° C to +55° C |
| Environmental Rating | IP 54 |
| Communications | 4G LTE |
| Screen | 61 cm (24") ruggedized LCD touchscreen |
Freewire Mobi EV Charger
The Mobi® EV Charger provides reliable, portable charging without the need for costly infrastructure.
An economical, mobile alternative to stationary Level 2 chargers, Mobi EV Chargers are battery-powered, delivering high-quality power to wherever EV charging is needed.
Key Features:
- Fully mobile solution that fits virtually anywhere on your site where EVs are parked
- Out-of-box solution that requires no additional construction, permitting, or transformer work on site
- No layout configuration requirements for installation
- Can charge EVs at up to 30 miles of range per hour, two at a time
- Can recharge from virtually any 240 V outlet or another EV charging station
- Integrated software for easy operation and management
- Has an accompanying phone app for drivers
SPECIFICATIONS:
| Continuous Power Output | 11 kW |
| Output Connectors | Dual-port: SAE J1772 |
| Output Voltage (AC) | 120 V / 240 V 1Ø |
| Output Frequency | 60 Hz / 50 Hz |
| Power Factor | 0.98 |
| Energy Chemistry | Lithium nickel manganese cobalt oxide |
| Energy Capacity | 80 kWh |
| Voltage (AC) | 90 V – 265 V 1Ø |
| Current | 32 A Max |
| Frequency | 45 – 65 Hz |
| Connector | SAE J1772 |
| Dimensions | 82 cm (32.3") W x 133 cm (52.3") L x 106 cm (41.7") H |
| Weight | 844 kg (1,860 lb) |
| Drive Speed | 6 kph (4 mph) |
| Incline Range | Up to 9% grade |
| Operating Temperature | 0° C to +50° C |
| Storage Temperature | -10° C to +60° C |
| Environmental Rating | IP 24 |
| Sound Level (full load at 23 feet) | 38 dB |
| Communications | 3G – 4G LTE, Wi-Fi |
| Screen | 18 cm (7") ruggedized LCD touchscreen |
Freewire Mobi Gen
The Mobi® Gen offers clean and quiet on-site power for facilities or remote sites that require a guaranteed source of power.
Powerful enough for construction, emergency response and all backup power needs.
Key Features:
- Pure power delivery with a long lifespan for all devices
- Operates quietly even at max power output
- Clean, zero-emission power, for indoor or outdoor use
- Plug-and-play design for immediate power
- Fully mobile unit, self-propelled, with wheels
SPECIFICATIONS:
| Continuous Power Output | 11 kW |
| Surge Power Output | 20 kW |
| Output Voltage (AC) | 100 V – 240 V 1Ø |
| Output Frequency | 60 Hz / 50 Hz |
| Power Factor | 0.98 |
| Output Panel | 8x NEMA 5-20R 120 VAC (20 A); 1x Turnlok CS6369 240 VAC (50 A); 1x NEMA 14-50R 240 VAC (50 A); 1x NEMA L6-30R 240 VAC (30 A); 1x NEMA L14-30R 240 VAC (30 A); 1x Cam-Lok J-Series E1016 240 VAC (50 A) / Black, Red, White, Green |
| AC Sine Wave | Pure |
| Energy Chemistry | Lithium nickel manganese cobalt oxide |
| Energy Capacity | 80 kWh (80S) |
| Voltage (AC) | 90 V – 265 V 1Ø |
| Current | 32 A Max |
| Frequency | 45 – 65 Hz |
| Connectors | SAE J1772 |
| Dimensions | 82 cm (32.3") W x 133 cm (52.3") L x 106 cm (41.7") H |
| Weight | 844 kg (1,860 lb) |
| Drive Speed | 6 kph (4 mph) |
| Incline Range | Up to 9% grade |
| Operating Temperature | 0° C to +50° C |
| Storage Temperature | -10° C to +60° C |
| Environmental Rating | IP 24 |
| Sound Level (full load at 23 feet) | 38 dB |
| Communications | 3G – 4G LTE, Wi-Fi |
| Screen | 18 cm (7") ruggedized LCD touchscreen |
